This article applies to:
Question:
How to identify R3000 MAC Address?
Reply
How to identify R3000 MAC Address?
To view R3000 Mac Address, navigate to System>Diagnostic>System Command in the R3000 GUI.
Select "Ifconfig (NIC Configuration) and click on the "Execute" button.
This will list the MAC Address for eth0 and eth1 (LAN1 and LAN2 respectively), for example, HWaddr 00:0E:0C:50:7F:84
eth0 Link encap:Ethernet HWaddr 00:0E:0C:50:7F:84
inet addr:1.2.3.4 Bcast:1.2.3.4 Mask:255.255.255.255
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0x3040 Memory:d0120000-d0140000
eth1 Link encap:Ethernet HWaddr 00:00:74:8A:2D:49
inet addr:209.11.160.115 Bcast:209.11.160.127 Mask:255.255.255.224
inet6 addr: fe80::200:74ff:fe8a:2d49/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:136066627 errors:5037451 dropped:0 overruns:0 frame:5037451
TX packets:2728533 errors:4 dropped:0 overruns:0 carrier:4
collisions:165393 txqueuelen:1000
RX bytes:2262793051 (2157.9 Mb) TX bytes:677295387 (645.9 Mb)
- This article was previously published as:
- 8e6 KB 284363