This article applies to:

• R3000

Question:

How to identify R3000 MAC Address?

Reply

How to identify R3000 MAC Address?

To view R3000 Mac Address, navigate to System>Diagnostic>System Command in the R3000 GUI.

Select "Ifconfig (NIC Configuration) and click on the "Execute" button.

This will list the MAC Address for eth0 and eth1 (LAN1 and LAN2 respectively), for example, HWaddr 00:0E:0C:50:7F:84 

eth0      Link encap:Ethernet  HWaddr 00:0E:0C:50:7F:84 

          inet addr:1.2.3.4  Bcast:1.2.3.4  Mask:255.255.255.255

          UP BROADCAST MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

          Base address:0x3040 Memory:d0120000-d0140000

eth1      Link encap:Ethernet  HWaddr 00:00:74:8A:2D:49 

          inet addr:209.11.160.115  Bcast:209.11.160.127  Mask:255.255.255.224

          inet6 addr: fe80::200:74ff:fe8a:2d49/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:136066627 errors:5037451 dropped:0 overruns:0 frame:5037451

          TX packets:2728533 errors:4 dropped:0 overruns:0 carrier:4

          collisions:165393 txqueuelen:1000

This article was previously published as:

8e6 KB 284363