After upgrading the filter to 2.0.10, SNMP does not work.

This article applies to:

• R3000

Question:

After upgrading the filter to 2.0.10, SNMP does not work.

Reply

The R3000 patch 2.0.10 introduced some changes and corrected some issues to SNMP access control. As a side effect, some versions of SNMP queries may not be acceptable to the R3000. You may have to use version 2c.

If your SNMP server is a Linux box, then try running the following:

snmpwalk -v 2c -c <community_string> <hostname_of_R3000>

If this returns favorable results, then make sure the SNMP query is using version 2c.

This article was previously published as:

8e6 KB 281055