|
Authentication
Settings:
The Authentication
Settings window displays when Authentication Settings is selected
from the Authentication menu in the navigation panel. This window
is used for entering or modifying general settings for the Web Filter
that will enable this server to authenticate and re-authenticate
users on the network.
Settings frame
When authentication in enabled—via the Enable/Disable Authentication
window—the fields in this frame are activated.
The
Web Filter NetBIOS Name displays. This is the Host Name entered in the
LAN Settings window.
1. If using a WINS server for name resolution, in the IP Address
of WINS Server field, enter the IP address of each Windows DNS server
to be filtered by this Web Filter, with a space between each IP address.
2. In the Virtual IP Address to Use for Authentication field, 1.2.3.5
displays by default. Enter the IP address that from now on will
be used for communicating authentication information between the
Web Filter and the PDC. This must be an IP address that is not being
used, and is on the same segment of the network as the Web Filter.
WARNING: If the IP address entered here is not in the same subnet
as this Web Filter, the net use connection will fail.
3. In the NIC Device to Use for Authentication pull-down menu, LAN2
would usually be selected for the invisible mode’s selection
for sending traffic on the network—in particular, for transferring
authentication data. If using the router or firewall mode, select
LAN1 for the type of interface the Web Filter will use as its sending
device.
4. Click Apply to apply your settings.
Related
Topics:
Back
| Top
|
