Verify if a change has been made to the LDAP Domain settings.

This article applies to:

• WF

Question:

• How may I verify if a change was made to the LDAP Domain settings that caused the Domain to go inactive and not activated again?

Reply:

You may verify by viewing the ‘Admin Audit Trail’ under System> Diagnostic of the UI. 

Below is an example log of a change made to the domain details of the WF LDAP settings.

1.    'Activated false' means a change was made and deactivated the domain.
2.    'Activated true', means that the 'Activate' button has been clicked on.
3.    'Domain_Test’ (this will be the name of domain the changes are being applied to) has been activated, this means that the domain  was  activated successfully. 

Time=4/12/12 6:01 AM, IP=127.0.0.1, Username=testadmin, Action=Settings have been changed in the Default Rule panel.
Time=4/12/12 6:01 AM, IP=127.0.0.1, Username=testadmin, Action=Set Domain 'Domain_Test’ Activated false in the Domain Settings panel.
Time=4/12/12 6:01 AM, IP=127.0.0.1, Username=testadmin, Action=Set Domain 'Domain_Test’ Activated true in the Domain Settings panel.
Time=4/12/12 6:01 AM, IP=127.0.0.1, Username=testadmin, Action=Domain: 'Domain_Test’ has been activated in the Domain Settings panel.

Notes: