Description
Within the NG-8000 Management Module it is necessary to enter at least one IP address when configuring SNMP Get. If you enter a community name and specify SNMP Get, and you do not enter an IP address, the SNMP V1 agent will be disabled automatically.
Symptoms
SNMPv1 is disabled when applying SNMP settings in the Management Module GUI if no IP address is entered.
Cause
There should be an SNMP server IP address / Host name defined, so all Get requests will be sent to it.
Solution
Enter an IP address when configuring SNMP GET.
VSOS
All software versions
- This article applies to:
- NG 8000
- This article was previously published as:
- Finjan KB 1310