This article applies to:
Question:
How do I shutdown or restart the Enterprise Reporter from the GUI?
Reply
How do I shutdown or restart the Enterprise Reporter from the GUI?
The shutdown and/or reboot process for the Enterprise Reporter can be done from the server GUI on port 88.
This can be accomplished by following steps below:
After you login into the server GUI you'll see three drop down menus named Network, Server, and Database.
1. Click the drop down menu under Server.
2. Click "Shut down", and you will then see the figure 1 below
3. Click on the radio button by "Restart" under the "Hardware" to restart the reporter. OR
- Click on the radio button by "Shut down" to completely turn the enterprise reporter off.
4. Then click "Apply" for either of your options above to take effect.
Fig. 1
- This article was previously published as:
- 8e6 KB 301028