Operational Modes: Firewall Mode

This article applies to:

• R3000

Question:

Operational Modes: Firewall Mode

Reply

Operational Modes: Firewall Mode

Administrator Console Settings
The firewall mode is a modification of the router mode. With the R3000 set up in this mode, the unit will filter all requests. If the request is appropriate, the original packet will pass unchanged. If the request is inappropriate, the original packet will be blocked from being routed through.

Using the firewall mode, while the outgoing request is delayed slightly—to allow filtering to take place before the packet leaves the gateway router of the network—return traffic remains unaffected.

Hardware Settings
The firewall mode setup cannot be used with any other mode setup (invisible or router).

This article was previously published as:

8e6 KB 300206